Repair personnel should pay attention to those matters in the use of lead sealing pliers at
Release date：2014-07-14 00:00 Source：http://www.67239082.com Click：
The installation and repair of cranes will often use a variety of pliers, generally divided into wire clamp, clamp, pliers, lead wire cutting pliers, stripping pliers.
Wire clamp loading tongs installation and repair work is the most frequently used tool, which is composed of a clamp head, forceps handle, a forceps head comprises a jaw, teeth, mouth edge and a four part.
Repair personnel should pay attention to using the wire clamp sealing clamp:
1, the use of wire clamp loading tongs, must not good insulation inspection forceps handle, otherwise not allowed to live operation, to avoid electric shock accident.
2, the use of wire clamp loading tongs shear current carrying wire, must be single, may also cut two or more conductors for the edge, so as not to phase line and phase line and the zero line short circuit between.
3, the use of wire clamp sealing pliers, knife edge surface should be to the side of the operator, is convenient to control the cutting position. The pliers head can not replace the hammer as a percussion instruments, in order to avoid deformation.
4, charged operation, keep a distance of more than 2cm metal hands and wire clamp, to prevent electric shock accidents.
5, wire clamp sealing pliers part should be often lubricated, ensure the flexible opening and closing.
Wire clamp loading tongs installation and repair work is the most frequently used tool, which is composed of a clamp head, forceps handle, a forceps head comprises a jaw, teeth, mouth edge and a four part.
Repair personnel should pay attention to using the wire clamp sealing clamp:
1, the use of wire clamp loading tongs, must not good insulation inspection forceps handle, otherwise not allowed to live operation, to avoid electric shock accident.
2, the use of wire clamp loading tongs shear current carrying wire, must be single, may also cut two or more conductors for the edge, so as not to phase line and phase line and the zero line short circuit between.
3, the use of wire clamp sealing pliers, knife edge surface should be to the side of the operator, is convenient to control the cutting position. The pliers head can not replace the hammer as a percussion instruments, in order to avoid deformation.
4, charged operation, keep a distance of more than 2cm metal hands and wire clamp, to prevent electric shock accidents.
5, wire clamp sealing pliers part should be often lubricated, ensure the flexible opening and closing.